page_banner

Slocable Aluminium 26/35KV Underground MV Power Cables

  • Voltage Level: 26/35 KV
  • Conductor Material: Aluminum
  • Conductor Nominal Cross-Section: 50mm²~800/35mm²
  • Insulation: Cross-linked polyethylene(XLPE)
  • Filler: Non-hygroscopic filler rope(>1 core)
renzheng

Slocable provides single-core aluminum conductor power cables, mainly medium-voltage underground cables. It is  26/35KV single-core aluminum conductor power cables, suitable for 50mm²-800mm², and is specially supplied for high-efficiency and reliable power applications.

MV power cable

Slocable Aluminium 26/35KV Underground MV Power Cables Parameter

Cable Material

Conductor  Compact round conductor
Conductor Shield Semi-conductive screen compound (≤ 500 mm²); Semi-conductive
tape + semi-conductive screen compound (≥ 500 mm²)
Insulation  Cross-linked polyethylene (XLPE)
Insulation screen Strippable semi-conductive screen compound
Metallic screen Copper tape; Copper wire screen (for 35 kV cables ≥ 500 mm²)
Filler Non-hygroscopic filler rope (>1 Core)
Binder tape Non-hygroscopic binding tape
Outer sheath  90 °C PVC sheath

 

Temperature Ratings

Maximum conductor
operating temperature
90 °C
Ambient operating temperature –15 °C to +55 °C
Minimum installation temperature ≥ 0 °C (Cable shall be preheated if ambient
temperature is below 0 °C)

Key Features & Benefits

Excellent

High-efficiency power transmission - Medium-voltage cables serve as the main channels connecting high-voltage substations and distribution networks, safely and reliably transmitting large amounts of electrical energy from power plants or upstream power grids to the next distribution level.

Easy-to-install

Power network distribution - In urban power grids, industrial parks, and large commercial complexes, MV cables form ring or radial distribution networks, distributing electrical energy to various power consumption areas and ultimately stepping down the voltage to low voltage (e.g., 380V/220V) for end users.

Halogen-free

Connecting critical equipment - Medium-voltage cables directly power large industrial equipment (such as high-power motors, water pumps, compressors, and wind turbines). For these high-power devices, direct medium-voltage power supply is more economical and efficient than conversion to low voltage, significantly reducing line losses.

High current

Long Lifespan and Low Maintenance - With proper design, selection, and installation, medium-voltage cables typically have a design lifespan of 30 to 40 years, with extremely low daily maintenance costs and highly reliable operation.

Why Choose Slocable Medium Voltage Cables

Complete Model Range:

YJV/YJLV: Basic type, used indoors, in tunnels, and other applications without forced mechanical external force.

 
YJV22/YJLV22: Steel strip armored, used for direct burial, pipelines, and tunnels; cannot withstand tension or compression.

 
YJV23 / YJLV23: Steel strip armored, based on YJV22, with an outer sheath that is more resistant to moisture and chemical corrosion. Suitable for direct burial in humid and corrosive environments.

 
YJV62 / YJLV62: Non-magnetic stainless steel strip armored, prevents magnetic interference, suitable for AC systems, and prevents eddy current heating in the armor layer.

 
YJV72 / YJLV72: Steel wire armored, can withstand tensile and compressive stress. Suitable for vertical laying, underwater, or applications subject to tensile stress.

Excellent Insulation Performance

Slocable's medium-voltage cables have extremely high insulation resistance and dielectric strength, and can withstand the electric field stress of medium-voltage levels for extended periods without breakdown.

 

High safety level

Rigorous type and factory tests (such as partial discharge and AC withstand voltage tests) ensure 100% compliance with national standards.
Special flame-retardant and fire-resistant design allows for sustained power supply for a period under fire conditions, providing valuable time for critical equipment operation and personnel evacuation.

Why Choose Slocable EN 50618 Solar Power Cable a

Application

Slocable Successfully Supported the Grid Connection of a 40MW Solar Power Plant in Hubei, China (2024)

In 2024, Slocable successfully supported the grid connection of a 40MW solar power plant project in Hubei, China.

During the project construction, we supplied a complete set of key electrical connection products, including:

• DC Solar Cables
 • MC4 Connectors
             • AC Low Voltage Cables
              • Medium Voltage Cables

Frequently Asked Questions

QWhat is an MV cable used for?
A:MV (Medium Voltage) cables are used to transmit and distribute electrical power between high-voltage transmission lines and low-voltage distribution networks. They are crucial for powering industrial facilities, large commercial buildings, and local utility networks where higher power and longer distances are involved compared to typical low-voltage cables. Key applications include powering heavy machinery in factories, managing power for mining operations, and supplying energy to urban and rural areas from substations.
QAt what voltage must you use a medium voltage cable?
A:You must use medium voltage (MV) cable for systems operating between 1 kV (1,000 volts) and 35 kV (35,000 volts). MV cables are specifically designed to handle the higher electrical stress and power distribution requirements of applications like utility networks, substations, and large industrial facilities.

Video Display

  • insns01
  • instagram
  • facebook
  • youtube
  • linked

Subscribe to Our Newsletter

Get Expert PV Station & Power Cable Solutions !!!

Contact Us